Prevention Is Key to Avoiding Home Water Damage

Wall dampness is a truly proliferate problem in homes across America, and unfortunately, the issue affects millions of homes. Yet, people don’t always understand the implications or know how to prevent it. This article offers a few top tips to prevent water from seeping into the walls, the floor and the home. 
Of course, you know that if there is a large hole in the roof, or if the window is open, you will get rain soaked furniture and carpeting. However, this is not the only way a home acquires rain damage, and you need to be aware of the different ways this can happen and how to prevent it. 

The Source 

It is critical that you always find the source of the damp area. This can be difficult because it is not always where you see the wet spots. Most exterior waterproofing minneapolis experts explain that finding the source is the key to preventing further water damage. 

Look for Tide Marks on Walls 

Tide marks are water marks at the bottom of walls. They can be caused by a variety of factors including plumbing problems. However, one of the causes that often creeps up on an owner is poor drainage of the property. When rainwater does not drain away from the house it will start to seep into the bottom of the walls causing these tide marks. In simple cases, turn on a dehumidifier to dry out the room. Check gutters and drains outside to ensure that debris is brushed away from outer walls. Keep objects, leaves and plants away from the edges of outer walls to prevent water from seeping in. 

Perform Regular Maintenance of The Property 

Know that water can get into the home through the walls as well as through floors and the roof. Check roofing materials and look for damaged masonry often. Fix these problems or call in an expert to fix them before they allow water in the home. 

Beware of Mold 

A strong warning sign of water seepage is black mold. When you have mold on either the exterior or the interior side of the house, it is hazardous because it attracts mites. More importantly, mold is a sign of extreme dampness and a serious water problem in the walls. 

Good Ventilation is Important 

When there is moisture in the property, the best way to keep it from permeating the home for long periods of time is to make sure there is proper ventilation. Air the rooms out well and open the windows. You can also add ventilation fans to the area to speed up the drying process. 

Keep The Home Warm in Winter 

You are probably tempted to turn down the thermostat or even turn it off when you are away at work. But this may not be a good idea as for when the house grows too cold condensation occurs and this can cause dampness to occur in the walls. Keep the house warmer and you will prevent humidity. 

Leave a Reply

Your email address will not be published. Required fields are marked *